SILOXANE THERMOREFLECTIVE PAINT

Aesthetic and protective, thermoreflective painting to be done by applying with a brush, roller, or spray of water-repellent and breathable paint like Protech Sil P THERM by Azichem Srl, based on siloxane resins, fine pigments, and hollow glass microspheres (3M Glass Bubble). PROTECH SIL P THERM is able to chemically bond with the substrate, forming a microporous filter that hinders water absorption without compromising the breathability of the substrate. Consumption: 0.2-0.3 lt/m2. The substrate, before applying the product, must be properly prepared to be clean, free of old paint traces, and dust-free. Any biodeteriorating settlements such as mold, algae, lichens, etc., must be preliminarily treated with specific products (Consilex Muffa Cleaner and Consilex Muffa Remover by Azichem Srl). Provide for the preliminary application of the specific primer Protech Sil Fix by Azichem Srl.

Technical characteristics of Protech Sil P THERM by Azichem Srl

  • Specific weight: 1.62 kg/lt
  • Dust-free: 30 min
  • Liquid water transmission rate: 0.10 kg/(m² • h^0.5)
  • Water vapor transmission rate: 0.06 m
  • Solar Reflectance Index (SRI) ASTM E1980-11: 108
  • Tack-free: 1 – 2 h
  • Depth hardening: 16 – 24 h
  • Water vapor permeability: 115 μ
  • Wet abrasion resistance EN 13300: 2
  • Solvent-free

POTASSIUM SILICATE THERMOREFLECTIVE PAINT

Application with a brush/roller of protective, decorative, mineral, thermoreflective, ecological, natural, non-toxic, breathable, solvent-free, anti-mold, antibacterial paint based on stabilized potassium silicates, hollow glass microspheres (3M Glass Bubble), and natural pigments, such as SANAXIL P THERM by Azichem Srl. The substrate, before application, must be properly prepared, clean, free of incoherent, detaching parts, and old paints (washable, organic, solvent-based). Any biodeteriorating settlements such as mold, algae, lichens, etc., must be preliminarily treated with specific products (Consilex Muffa Cleaner and Consilex Muffa Remover by Azichem Srl). Provide for the preliminary application of the primer Sanaxil Fix by Azichem Srl.

Consumption Sanaxil P THERM = 0.18 – 0.25 l/m2

Technical characteristics of Sanaxil P THERM by Azichem Srl

  • Permeability coefficient: 0.26 kg/(m² • h^0.5)
  • Dust-free: 30 min
  • Water vapor transmission rate: 0.005 m
  • Tack-free: 1 – 2 h
  • Depth hardening: 16 – 24 h
  • Water vapor permeability: 50 μ
  • Dry residue: 59 %

SILOXANE THERMOREFLECTIVE PLASTER

Aesthetic and protective finish to be done by applying with a trowel, sponge trowel, or spatula of water-repellent, breathable, pigmented in paste, ready-to-use plaster, based on siloxane resins in aqueous dispersion, formulated with hollow glass microspheres (3M Glass Bubble), thermoreflective, anti-condensation, such as Protech Sil I THERM by Azichem Srl, CE certified according to EN 15824 standards. The substrate, before applying the product, must be properly prepared to be clean, free of old paint traces, and dust-free. Any biodeteriorating settlements such as mold, algae, lichens, etc., must be preliminarily treated with specific products (Consilex Muffa Cleaner and Consilex Muffa Remover by Azichem Srl). Provide for the preliminary application of the specific primer Protech Sil Fix by Azichem Srl.

Consumption:
GRAIN 1 mm: about 1.60 – 2.00 kg/m²;
GRAIN 1.5 mm: about 2.10 – 2.50 kg/m²;
GRAIN 2 mm: about 2.50 – 3.20 kg/m²;
GRAIN 2.2 mm: about 3.00 – 3.60 kg/m².

Technical characteristics of the siloxane plaster Protech Sil I THERM by Azichem Srl:

  • Adhesion to substrate: 0.4 MPa
  • Thermal conductivity UNI EN 1745: 0.83 – 0.93 W/m*K
  • Determination of direct tensile adhesion (Fh) UNI EN 1542: 0.4 MPa
  • Liquid water transmission rate UNI EN 1062-3: 0.070 kg/(m² • h^0.5)
  • Water vapor transmission rate UNI EN ISO 7783-2: 0.3992 FP:A
  • Solar Reflectance Index (SRI) ASTM E1980-11: 95.2
  • Complete hardening (20°C): 24 – 48 h

POTASSIUM SILICATE THERMORELFECTIVE PLASTER

Protective, decorative, and sanitizing finish plaster for plastered walls, by applying with a trowel or spatula, in two coats, of mineral, non-toxic, breathable, anti-mold, eco-friendly finish based on stabilized potassium silicate, botticino flour, natural pigments, and hollow glass microspheres (3M Glass Bubble) such as Sanaxil I THERM, CE certified according to EN 15824 standards, after preliminary treatment of the substrates with the primer Sanaxil Fix by AZICHEM Srl. Any biodeteriorating settlements such as mold, algae, lichens, etc., must be preliminarily treated with specific products (Consilex Muffa Cleaner and Consilex Muffa Remover by Azichem Srl).

Indicative consumption:

  • GRAIN 1 mm: about 1.60 – 2.00 kg/m²;
  • GRAIN 1.5 mm: about 2.10 – 2.50 kg/m²;
  • GRAIN 2 mm: about 2.50 – 3.20 kg/m²;
  • GRAIN 2.2 mm: about 3.00 – 3.60 kg/m².

Technical characteristics of Sanaxil I THERM plaster by Azichem Srl:

  • Thermal conductivity UNI EN 1745: 1.17 – 1.28 W/m*K
  • Determination of direct tensile adhesion (Fh) UNI EN 1542: 0.4 MPa
  • Liquid water transmission rate UNI EN 1062-3: 0.154 kg•h^0.5/m²
  • Water vapor transmission rate UNI EN ISO 7783-2: 0.3369 m