INSULATING, MOLD-RESISTANT, AND ANTI-CONDENSATION MICROCAP

Supply and installation of a microcap system made with the special adhesive/skim coat SANAKOLL and insulating membrane SANATEX. Total system thickness is 9 mm. Spread the adhesive on the properly cleaned and prepared surface. Cover the entire surface with a layer of SANAKOLL of at least 2 mm, applied with a trowel and then combed with a 5 mm notched metal trowel. Apply the SANATEX membrane, pressing it onto the still-fresh layer of SANAKOLL. Fill the joints where the different rolls of SANATEX meet with SANAKOLL.

Wait 48 hours before skimming the surface of the insulating membrane with SANAKOLL, applied in two coats with a trowel, finishing the second coat with a sponge float.

Technical characteristics of the adhesive/skim coat SANAKOLL:

  • EN 1015-18 Capillary absorption: class W1
  • EN 1745 Thermal conductivity < 0.2 W/m*K
  • EN 1015-12 Bond strength 0.8 N/mm²
  • EN 1015-6 Bulk density 1380 kg/m³
  • EN 1015-19 Breathability 12 μ
  • EN 1015-11 Compressive strength after 28 days 5 N/mm²
  • EN 1015-11 Flexural strength after 28 days 3 N/mm²

Technical characteristics of the SANATEX membrane:

  • UNI EN 12311-2 Longitudinal and transverse tensile strength: > 2 N/mm2
  • EN 13501 Fire reaction: Euroclass E
  • Area mass T=23°C _ U.R. 50% : 700 gr/m2
  • UNI EN 12114:2001 Air tightness T=29°C _ U.R. 40% : 0.16 m³ / (m² · h · 50Pa)
  • UNI EN ISO 1931 Water vapor transmission T=23°C _ U.R. 50 (Sd): 0.27 m
  • EN 12667 Thermal conductivity : 0.031 W/mk
  • DIN 53931 Mold protection, two-week incubation at 28°C: no fungal growth